Speak to an engineer today! 214.926.4950

Product Finder
Browse Products

Shop

Shipping fulfilment powered by Instrumart logo

  • TEX-DEW200 Humidity/Temperature Controller for Wet/Dry Bulbs, 2x RTD PT100

    Dual Display 2x6-digit Panel Meter/Controller

    TEX-DEW200 (High Voltage, 2x 4-20mA Analog Outputs)

    CUSTOMIZABLE PRODUCT: This product is available in custom configurations for OEMs and high volume orders (over 100 pieces). If you have a difficult application that requires our engineering input, please call 1-888-652-4757 so we can assist you.

    Power Supply (Please Select)
    Analog Output
    Buy at Instrumart

    • 2x Relay Outputs $   Out of stock

    • 4x Relay Outputs $   Out of stock

    • RS232 (RJ Terminal) $   Out of stock

    • RS485 (Screw Terminal) $   Out of stock

    This controller has been designed for wet/dry bulb relative humidity applications. It comes factory precalibrated to suit 385 RTD input, and features dual 4-20mA analogue output and a dual display for temperature and R.H.

    At a glance:

    • Dual 3-wire RTD input (385/392, PT100). Suits wet/dry bulbs
    • Dual display for simultaneous viewing of humidity and temperature
    • Dual analogue output (4-20mA)
    • Simple, intuitive interface with scrolling text prompts
    • Factory calibrated for 385RTD – simple recalibration using high and low input signals
    • Security PIN protected calibration and setpoint access
    TEX-DEW200-HV, TEX-DEW200-HV-R2, TEX-DEW200-HV-R2-S2R, TEX-DEW200-HV-R2-S4S, TEX-DEW200-HV-S2R, TEX-DEW200-HV-S4S, TEX-DEW200-HV-R4, TEX-DEW200-HV-R4-S2R, TEX-DEW200-HV-R4-S4S, TEX-DEW200-ADI-HV, TEX-DEW200-ADIS-HV, TEX-DEW200-R2ADI-HV, TEX-DEW200-R2ADIS-HV, TEX-DEW200-R4ADI-HV, TEX-DEW200-R4ADIS-HV, TEX-DEW200-LV, TEX-DEW200-LV-R2, TEX-DEW200-LV-R2-S2R, TEX-DEW200-LV-R2-S4S, TEX-DEW200-LV-S2R, TEX-DEW200-LV-S4S, TEX-DEW200-LV-R4, TEX-DEW200-LV-R4-S2R, TEX-DEW200-LV-R4-S4S, TEX-DEW200-ADI-LV, TEX-DEW200-ADIS-LV, TEX-DEW200-R2ADI-LV, TEX-DEW200-R2ADIS-LV, TEX-DEW200-R4ADI-LV, TEX-DEW200-R4ADIS-LV
    Buy at Instrumart
    CE
    Modbus Member
    Input
     
    Sensor input
    1 x wet bulb, 1 x dry bulb. Dual 3-wire RTD (385/392), PT100
    Excitation
    24V DC (50mA max)
    Sampling rate
    2.5Hz
    Resolution
    0.025% full scale, 16 bit
    Accuracy
    0.05% of reading
    Ambient drift
    50ppm/°C typical
    Temperature units
    °F or °C
    Calibration
    Calibrated for 385 RTD, 0–100°C. Simple recalibration (if needed) using high and low display values
    Power
     
    Power supply
    HV: 85–265V AC / 95–370V DC, or LV: 15–48V AC / 10–72V DC
    Features
     
    Security
    Input and setpoint setups are independently accessible and PIN protected
    Relay Output
     
    Number of relay outputs
    None, 2, or 4
    Relay output type
    5A form A (3A 240V AC max or 3A 30V DC max)
    Analog Output (Retransmission)
     
    Number of analog outputs
    2 (humidity & temperature)
    Analog output type
    Isolated 16 bit 4–20mA
    Comm Port(s)
     
    Serial port configuration
    1 x isolated RS232 or RS485 serial port (optional)
    Programming
     
    Front panel buttons
    Up, Down, P (Prog/Enter), 2 x Function Buttons for menu access
    Display
     
    Display type
    LED Display, 5 buttons
    LED indicators
    6 setpoint indicator LED’s
    Digits
    2 rows of 6 digits, 0.4" (10mm), 14 segment alphanumeric LED
    Construction
     
    Casing
    Panel mount case
    Ingress protection rating
    IP65 dust/splash proof (face only)
    Dimensions (H x W x D)
    1.9 x 3.8 x 4.7" (48 x 96 x 120mm)

    TEX-DEW200 Manual TEX-DEW200 Manual 15V06, 28-Aug-2015 | (373 KB)

    TEX-DEW200 Datasheet TEX-DEW200 Datasheet 13V01, 12-Nov-2013 | (128 KB)

    TEX-DEW200
    -HV 85-265V AC / 95-370V DC
    -LV 15-48V AC / 10-72V DC
    Analog Output (Included by Default)
    2 x 4-20mA analog outputs
    Relay Output (Optional)
      None
    -R2 2 x relay outputs
    -R4 4 x relay outputs
    Comms (Optional)
      None
    -S2R 1 x RS232 serial port (RJ11 terminal)
    -S4S 1 x RS485 serial port (screw terminal)
    Sample order codes: TEX-DEW200-LV, TEX-DEW200-HV-R4-S2R
    TEX-DEW200 (High Voltage, 2x 4-20mA Analog Outputs)

All prices are in US Dollars. For pricing in other currencies, please contact us.