Speak to an engineer today! 214.926.4950

Shop

Shipping fulfilment powered by Instrumart logo

  • PRO-FLO200 Flow Batching Totalizer: NPN, PNP, TTL, Namur, Tacho or Closed Contact

    Dual Display 2x6-digit Panel Meter/Controller

    PRO-FLO200 (High Voltage)

    CUSTOMIZABLE PRODUCT: This product is available in custom configurations for OEMs and high volume orders (over 100 pieces). If you have a difficult application that requires our engineering input, please call 1-888-652-4757 so we can assist you.

    Power Supply (Please Select)
    • 2x Relay Outputs $   Out of stock

    • 4x Relay Outputs $   Out of stock

    • 4-20mA / 0-10V $   Out of stock

    • RS232 (RJ Terminal) $   Out of stock

    • RS485 (Screw Terminal) $   Out of stock

    What it does:
    Accepts digital pulse inputs from flow sensors and meters. Dual display shows the flow rate and volume.

    This dual display flow batching totalizer accepts a variety of flow sensor inputs, and has a variety of advanced features, including: flow batching, volumetric pulse, in flight adjustment, setpoint latching, startup inhibit and user programmable input functions.

    • NPN, PNP, TTL, namur, tacho or closed contact sensors
    • Single totalizer
    • Customisable display source, front panel button and rear input pins
    • Batching feature
    • Advanced setpoint features, including setpoint trailing, volumetric pulse, latching, startup inhibit and inflight adjustment
    • Calibrate using direct K factor entry or pulses/unit method
    • Signal averaging on the rate
    • Dual display for simultaneous viewing of total and rate
    PRO-FLO200-HV, PRO-FLO200-HV-A-S2R, PRO-FLO200-HV-R2, PRO-FLO200-HV-R2-A, PRO-FLO200-HV-R2-A-S2R, PRO-FLO200-HV-R2-S2R, PRO-FLO200-HV-R4, PRO-FLO200-HV-R4-A, PRO-FLO200-HV-R4-A-S2R, PRO-FLO200-HV-R4-S2R, PRO-FLO200-HV-S2R, PRO-FLO200-LV, PRO-FLO200-LV-A-S2R, PRO-FLO200-LV-R2, PRO-FLO200-LV-R2-A, PRO-FLO200-LV-R2-A-S2R, PRO-FLO200-LV-R2-S2R, PRO-FLO200-LV-R4, PRO-FLO200-LV-R4-A, PRO-FLO200-LV-R4-A-S2R, PRO-FLO200-LV-R4-S2R, PRO-FLO200-LV-S2R, PRO-FLO200-AS-HV, PRO-FLO200-R2-HV, PRO-FLO200-R2A-HV, PRO-FLO200-R2AS-HV, PRO-FLO200-R2S-HV, PRO-FLO200-R4-HV, PRO-FLO200-R4A-HV, PRO-FLO200-R4AS-HV, PRO-FLO200-R4S-HV, PRO-FLO200-S-HV, PRO-FLO200-AS-LV, PRO-FLO200-R2-LV, PRO-FLO200-R2A-LV, PRO-FLO200-R2AS-LV, PRO-FLO200-R2S-LV, PRO-FLO200-R4-LV, PRO-FLO200-R4A-LV, PRO-FLO200-R4AS-LV, PRO-FLO200-R4S-LV, PRO-FLO200-S-LV
    RCM
    CE
    Modbus Member
    Input
     
    Sensor input
    NPN, PNP, TTL, namur, tacho or closed contact
    Excitation
    24V DC (50mA max)
    Accuracy
    0.005%
    Ambient drift
    Typically 2ppm/°C
    K Factor ranges
    0.1 to 99.9999, 999.999 or 9999.99
    Noise filtering
    0.2, 2, 20kHz or Off
    Input frequency
    2Hz to 10kHz
    Calibration
    Direct K factor entry or pulses per unit of measurement
    Power
     
    Power supply
    High voltage 85–265V AC / 95–370V DC, or Low voltage 15–48V AC / 10–72V DC
    Relay Output
     
    Number of relay outputs
    None, 2, or 4
    Relay output type
    5A form A (3A 240V AC max or 3A 30V DC max)
    Analog Output (Retransmission)
     
    Number of analog outputs
    None or 1
    Analog output type
    Isolated 16 bit 4–20mA/0–10V
    Features
    Window programmable over any range within the full scale range of the controller
    Comm Port(s)
     
    Number of comm ports
    None or 1
    Serial port configuration
    Isolated RS232 (screw terminal) or RS485 (RJ11 terminal)
    Output mode
    Define ASCII, Modbus RTU slave or Ranger A
    Baud rates
    1200-115k2 baud
    Parity
    Odd, even or none
    Programming
     
    Front panel buttons
    Up, Down, P (Prog/Enter), plus 2x Function Buttons for menu access
    Display
     
    Display type
    LED display, 5 buttons
    LED indicators
    6 setpoint indicator LEDs
    Digits
    2 rows of 6 digits, 0.4" (10mm), 14 segment alphanumeric LED
    Construction
     
    Casing
    Panel mount case
    Ingress protection rating
    IP65 dust/splash proof (face only)
    Dimensions (H x W x D)
    1.9 x 3.8 x 4.7" (48 x 96 x 120mm)
    Cutout area
    1.79 x 3.64" (45.5 x 92.5mm)

    PRO-FLO200 Manual PRO-FLO200 Manual 16V06, 23-Sep-2016 | (574 KB)

    PRO-FLO200
    -HV 85-265V AC / 95-370V DC
    -LV 15-48V AC / 10-72V DC
    Relay Output
      None
    -R2 2 x relay outputs
    -R4 4 x relay outputs
    Analog Output
      None
    -A 1 x 4-20mA/0-10V analog output
    Comms
      None
    -S2R 1 x RS232 serial port (RJ11 terminal)
    -S4S 1 x RS485 serial port (screw terminal)
    Sample order codes: PRO-FLO200-LV, PRO-FLO200-HV-R4-A-S2R
    PRO-FLO200 (High Voltage)

All prices are in US Dollars. For pricing in other currencies, please contact us.