Speak to an engineer today! 214.926.4950

Product Finder
Browse Products

Panel Meters / Indicators

Shipping fulfilment powered by Instrumart logo

  • PRO-RTD Quad RTD PT100Ω (Pt385/392/ CU10)

    6-digit Panel Meter/Controller

    PRO-RTD (High Voltage)

    CUSTOMIZABLE PRODUCT: This product is available in custom configurations for OEMs and high volume orders (over 100 pieces). If you have a difficult application that requires our engineering input, please call 1-888-652-4757 so we can assist you.

    Power Supply (Please Select)
    Buy at Instrumart

    • 2x Relay Outputs $   Out of stock

    • 4x Relay Outputs $   Out of stock

    • 4-20mA / 0-10V $   Out of stock

    • RS232 (RJ Terminal) $   Out of stock

    • RS485 (Screw Terminal) $   Out of stock

    What it does:
    Accepts input from up to four RTD sensors, and performs averaging calculations as per your custom settings. Offers optional relay and analog output for set point alarming and control, plus serial communications.

    This quad channel RTD controller is ideal for numerous industrial temperature applications. It accepts direct sensor input from RTD 385, 392 and CU10 temperature probes. One of the key features of this controller is its ability to average the inputs across 2, 3 or 4 temperature channels, and use this averaged value for a display source or for setpoint activation.

    At a glance:

    • 4 x RTD Pt100Ω (385/392/CU10)
    • Channel averaging across 2, 3 or 4 input channels
    • Signal averaging for individual channels
    • Customisable display
    • Choice of °F or °C
    PRO-RTD-HV, PRO-RTD-HV-A-S2R, PRO-RTD-HV-R2, PRO-RTD-HV-R2-A, PRO-RTD-HV-R2-A-S2R, PRO-RTD-HV-R2-S2R, PRO-RTD-HV-R4, PRO-RTD-HV-R4-A, PRO-RTD-HV-R4-A-S2R, PRO-RTD-HV-R4-S2R, PRO-RTD-HV-S2R, PRO-RTD-LV, PRO-RTD-LV-A-S2R, PRO-RTD-LV-R2, PRO-RTD-LV-R2-A, PRO-RTD-LV-R2-A-S2R, PRO-RTD-LV-R2-S2R, PRO-RTD-LV-R4, PRO-RTD-LV-R4-A, PRO-RTD-LV-R4-A-S2R, PRO-RTD-LV-R4-S2R, PRO-RTD-LV-S2R, PRO-RTD-AS-HV, PRO-RTD-R2-HV, PRO-RTD-R2A-HV, PRO-RTD-R2AS-HV, PRO-RTD-R2S-HV, PRO-RTD-R4-HV, PRO-RTD-R4A-HV, PRO-RTD-R4AS-HV, PRO-RTD-R4S-HV, PRO-RTD-S-HV, PRO-RTD-AS-LV, PRO-RTD-R2-LV, PRO-RTD-R2A-LV, PRO-RTD-R2AS-LV, PRO-RTD-R2S-LV, PRO-RTD-R4-LV, PRO-RTD-R4A-LV, PRO-RTD-R4AS-LV, PRO-RTD-R4S-LV, PRO-RTD-S-LV,PRO-RTD-HV-A-S2R-D, PRO-RTD-HV-R2-A-S2R-D, PRO-RTD-HV-R2-S2R-D, PRO-RTD-HV-R4-A-S2R-D, PRO-RTD-HV-R4-S2R-D, PRO-RTD-HV-S2R-D, PRO-RTD-LV-A-S2R-D, PRO-RTD-LV-R2-A-S2R, PRO-RTD-LV-R2-S2R-D, PRO-RTD-LV-R4-A-S2R-D, PRO-RTD-LV-R4-S2R-D, PRO-RTD-LV-S2R-D, PRO-RTD-ASD-HV, PRO-RTD-R2ASD-HV, PRO-RTD-R2SD-HV, PRO-RTD-R4ASD-HV, PRO-RTD-R4SD-HV, PRO-RTD-SD-HV, PRO-RTD-ASD-LV, PRO-RTD-R2ASD-LV, PRO-RTD-R2SD-LV, PRO-RTD-R4ASD-LV, PRO-RTD-R4SD-LV, PRO-RTD-SD-LV
    Buy at Instrumart
    Input
     
    Number of input channels
    4
    Sensor input
    RTD PT100Ω (Pt385/392/CU10)
    Excitation
    160μA
    Processing rate
    5Hz
    Resolution
    0.1°C
    Span drift
    ±30ppm/°C FS max
    Non-linearity
    1°C max
    Input noise
    160nVp-p typical at 1Hz output rate
    Noise rejection
    50/60Hz
    Temperature units
    Degrees F or C
    Power
     
    Power supply
    HV (85–265V AC/95– 370V DC) or LV (15–48V AC/10–72V DC)
    General Specifications
     
    Output rate
    Fixed 10Hz averaged per channel
    Features
     
    Security
    Input and setpoint setups are independently accessible and PIN protected
    Relay Output
     
    Number of relay outputs
    None, 2, or 4
    Relay output type
    5A form A (3A 240V AC max or 3A 30V DC max)
    Analog Output (Retransmission)
     
    Number of analog outputs
    None or 1
    Analog output type
    1 x Isolated 16 bit 4–20mA / 0–10V (selectable)
    Features
    Fully scalable. Window programmable over any range within the controller\'s full-scale range
    Comm Port(s)
     
    Number of comm ports
    None or 1
    Serial port configuration
    Isolated RS232 (RJ terminal) or RS485 (screw terminal)
    Output mode
    Custom ASCII, Modbus RTU slave, or Ranger A (5 updates/sec)
    Baud rates
    1200–115k2 baud
    Programming
     
    Front panel buttons
    Up, Down, P (Prog/ Enter), plus 2 Menu buttons (F)
    Display
     
    Display type
    LED display, 5 buttons
    LED indicators
    6 setpoint indicator LED\'s
    Digits
    1 row of 6 digits, 0.5" (13mm), 14 segment alphanumeric LED
    Full scale range
    0.1 to 99999.9
    Construction
     
    Casing
    Panel mount case
    Ingress protection rating
    IP65 dust/ splash proof (face only)
    Dimensions (H x W x D)
    1.89 x 3.78 x 4.72" (48 x 96 x 120mm)
    Cutout area
    1.77 x 3.62"( 45 x 92mm)

    PRO-RTD Manual PRO-RTD Manual 17V01, 04-Aug-2017 | (7746 KB)

    PRO-RTD
    -HV 85-265V AC / 95-370V DC
    -LV 15-48V AC / 10-72V DC
    Relay Output (Optional)
      None
    -R2 2 x relay outputs
    -R4 4 x relay outputs
    Analog Output
      None
    -A 1 x 4-20mA/0-10V analog output
    Comms
      None
    -S2R 1 x RS232 serial port (RJ11 terminal)
    -S4S 1 x RS485 serial port (screw terminal)
    Sample order codes: PRO-RTD-LV, PRO-RTD-HV-R4-A-S2R

    Customers also bought...

    PRO-RTD (High Voltage)

All prices are in US Dollars. For pricing in other currencies, please contact us.